| **Device** | **Status** | **Modules** | | Display | Working | xf86-video-intel | | Touchscreen | Working | goodix | | Wireless | Working, with kernel patches / kernel 4.13 | rt8723bs | | Audio | Working | snd_soc_rt5640 | | Touchpad | Working | | Battery Status | Working | battery_BATC | | Camera | Not working | | Bluetooth | Working, with kernel patches | rtl8723bs_bt | | MicroSD Reader | Partially Working | sdhci | | Power Management | Not working | | Accelerometer | Working, with external kernel module | bmc150_accel_i2c | | Hardware Buttons | Working, kernel module has to be enabled | soc_button_array gpio_keys | The Teclast X16 [Pro](http://www.teclast.com/en/zt/X16Pro/) and [Power](http://www.teclast.com/en/zt/X16Power/) are two 2 in 1 [Tablet PC](/index.php/Tablet_PC "Tablet PC") devices, equipped with a 11.6 inch display that supports for 1920 x 1080 pixels. Besides, the Teclast X16 Pro and Power support dual OS that allows users to take advantage of both Windows 10 and Android 5.1 operating systems on the device. They are powered by fifth-generation Intel Atom Z8500 (Pro) and Intel Atom Z8700 (Power) CPUs, aka Cherry Trail-Braswell, and by eighth-generation Intel HD graphics (12EUs Pro, 16EUs Power), coupled with 4GB of RAM (Pro) or 8GB of RAM (Power), both DDR3-1066 (due to a BIOS bug). With kernel 4.7.2 and newer surprisingly much is working or there is a way to get it to work. If you have the time to go through all the steps you can get a pretty good useable linux tab. ## Contents * [1 Configuration](#Configuration) * [1.1 Booting with UEFI bios (systemd-boot)](#Booting_with_UEFI_bios_.28systemd-boot.29) * [1.2 Display](#Display) * [1.3 Sound card](#Sound_card) * [2 Troubleshooting](#Troubleshooting) * [2.1 WiFi](#WiFi) * [2.2 Bluetooth](#Bluetooth) * [2.3 Touchpad (Cover)](#Touchpad_.28Cover.29) * [2.4 Accelerometer](#Accelerometer) * [2.5 Hardware Buttons](#Hardware_Buttons) * [3 Partially broken devices](#Partially_broken_devices) * [3.1 microSD Reader](#microSD_Reader) * [4 Broken devices](#Broken_devices) * [4.1 Micro-USB OTG port](#Micro-USB_OTG_port) * [4.2 Power Management](#Power_Management) * [4.3 Camera](#Camera) * [5 Device Info](#Device_Info) * [5.1 Devices on i2c bus](#Devices_on_i2c_bus) * [6 Tips and ticks](#Tips_and_ticks) * [6.1 On-Screen Keyboard](#On-Screen_Keyboard) ## Configuration ### Booting with UEFI bios (systemd-boot) The Teclast X16 is able to boot from usb mass storage devices connected to an usb hub. During the installation an usb keyboard (or the keyboard cover) is needed to install arch linux. You can enter the bios by pressing del several times and overrule the boot device. There isn't anything special to do, just prepare the flash drive and boot from it. ### Display Changing display brightness works, however you have to alter the keybindings yourself because of non-standard keycodes for display brightness; see [Backlight](/index.php/Backlight "Backlight"), [Touchscreen](/index.php/Touchscreen "Touchscreen"). Automatic rotation does not work because of the missing support for the accelerometer. ### Sound card Install alsamixer and set the following of about 50 volume controls have to be set to 30-50%, too much gain results in clicking noise. * media1_in Gain 0 * codec_out1 Gain 0 * pcm0_in Gain 0 * Mono DAC * Speaker ClassD * Speaker This is remembered during a reboot. Global shortcuts to change sound volume work. ## Troubleshooting ### WiFi Working since kernel >= 4.13, rtl8723bs_bt kernel module is included in linux >= 4.13, as well as the firmware binaries. This step is only necessary for older kernels. There is an issue with wpa_supplicant 1.2.6\. For the time beeing you have to downgrade wpa_supplicant to version 1.2.5\. See [https://github.com/hadess/rtl8723bs/issues/113](https://github.com/hadess/rtl8723bs/issues/113) Compiling an Arch Linux kernel, see [Kernels/Traditional compilation](/index.php/Kernels/Traditional_compilation "Kernels/Traditional compilation") 1) apply the pm_set/get-revertes + rfkill patches **NOT** the sound patches from Laszlo-Fiat see: [http://github.com/hadess/rtl8723bs/issues/76](http://github.com/hadess/rtl8723bs/issues/76) (0001-My-changes-for-4.7.0-rc7-for-Baytrail-T.patch.txt) 2) compile kernel (takes many hours), create new vmlinuz/initrd, create syslinux entries check out the sources from [http://github.com/hadess/rtl8723bs](http://github.com/hadess/rtl8723bs) + make install ### Bluetooth This device needs the rfkill patch from the step above. see [http://github.com/lwfinger/rtl8723bs_bt](http://github.com/lwfinger/rtl8723bs_bt) not much to do, file-transfer works. ### Touchpad (Cover) This is recognized as a generic pointing device, not as [Touchpad Synaptics](/index.php/Touchpad_Synaptics "Touchpad Synaptics") ### Accelerometer /sys/bus/i2c/devices lists a BMA250E device ``` cd /sys/bus/i2c/devices/i2c-BMA250E:00/iio:device0 watch cat in_accel_x_raw in_accel_y_raw in_accel_z_raw ``` Tip: this kernel module has to be compiled by yourself, search for bmc150 below modules/industrialio ### Hardware Buttons Kernel >= 4.13: soc_button_array and gpio_keys has to be loaded after soc is initialized. /etc/modprobe.d/teclast_buttons.conf: ``` softdep soc_button_array pre: snd_soc_core post: gpio_keys ``` ## Partially broken devices ### microSD Reader Working fine with SDHC and lower cards, crashing with SDXC UHS-I and higher ones, (Timeout for Hardware Interrupt issue) ## Broken devices ### Micro-USB OTG port Nothing happens if a USB Stick, or any other device, is plugged in. ### Power Management Hibernate and pm-suspend crashes. To avoid any kind of instability, add this "intel_idle.max_cstate=1" to the CMDLINE. ### Camera According to /sys/bus/i2c/devices, there is an OVTI2680 device (OmniVision OV2680 - Front Camera) and INT5648 device (OmniVision OV5648 - Rear Camera) ## Device Info ### Devices on i2c bus /sys/bus/i2c/devices | i2c-10EC5645:00 | rt5645 | Realtek RT5645 - Sound Card | | i2c-BMA250E:00 | bmc150_accel_i2c | Bosch BMC150 - Accelerometer | | i2c-FGCW2015:00 | CW2015 Fuel-Gauge IC? ([http://www.lean-chip.com/mc-download.html?id=154](http://www.lean-chip.com/mc-download.html?id=154)) | | i2c-GDIX1001:00 | goodix | Goodix GT9110P - Touchscreen | | i2c-INT33FD:00 | intel_soc_pmic_i2c | Intel I2C Interface | | i2c-INT5648:00 | OmniVision OV5648 - Rear Camera | | i2c-LNXVIDEO:00 | Video Extension - ACPI_VIDEO | | i2c-OVTI2680:00 | OmniVision OV2680 - Front Camera | | i2c-TBQ24297:00 | TI BQ24297 - Charging Controller ([http://www.ti.com/product/bq24297/description](http://www.ti.com/product/bq24297/description)) | | i2c-XXVM149C:00 | VM149C Voice-Coil-Motor IC? ([http://www.siti.com.tw/product/spec/Motor/SP-VM149C-A.002.pdf](http://www.siti.com.tw/product/spec/Motor/SP-VM149C-A.002.pdf)) | ## Tips and ticks ### On-Screen Keyboard Depending on your preferred window manager, install kvkbd for [KDE](/index.php/KDE "KDE") or CellWriter for [GNOME](/index.php/GNOME "GNOME"), see [Tablet PC](/index.php/Tablet_PC "Tablet PC")